i2c: core/pxa: Add support for hardware lock
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock
Quoted 40 lines · Vaibhav Hiremath
Quoted 31 lines · Vaibhav Hiremath
To justify the need for hardware lock, lets take a real usecase scenario -
In case of Marvell SoC, PXA910 silicon, both AP and CP are present and these two ARM cores are sharing one pair of I2C pins.
In order to keep I2C transaction operated with atomic, hardware lock (RIPC) is required.
This patch extends support for atomic operation by adding hardware lock support
to the i2c-core.PATCH[1/3] : Core changes for hardware lock
PATCH[2/3 & 3/3] : hardware lock support to i2c-pxa bus driver.Link to previous post:
http://lkml.iu.edu/hypermail/linux/kernel/1104.3/02352.html
http://lkml.iu.edu/hypermail/linux/kernel/1104.3/02353.html
http://lkml.iu.edu/hypermail/linux/kernel/1104.3/02354.htmlTODO:
- DT node addition
I am using PXA1928 based platform which is still not available in Mainline, so it is based on, below patch-series Link to Rob's patches:
https://lkml.org/lkml/2015/5/1/14
https://lkml.org/lkml/2015/5/19/1206
PMIC 88pm860 support
http://www.spinics.net/lists/arm-kernel/msg422554.htmlQuoted 5 lines
Vaibhav Hiremath (3):
i2c: core: append hardware lock with bus lock
i2c: pxa: Add support for hardware lock
i2c: pxa: Add pin ctrl support for CP core access
Quoted 4 lines
Wolfram,
Any update on this patch-series?
Any update? Its long time since this patch is pending for review.
Thanks,
Vaibhav