Add board detection for Odroid XU3 / XU3Lite / XU4
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 7 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 7 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4
Hello Simon,
Quoted 27 lines · Simon Glass
Hi Przemyslaw,
Quoted 15 lines · Przemyslaw Marczak
This patchset adds:
- define the CPU name for Chromebook Peach Pi as Exynos5800
- set the cpu id of Exynos5422 to0x5422
- S2MPS11 PMIC I/O driver
- Exynos5420-compatible (9-channel, 12-bit) ADC driver
- board detection for Odroid XU3 / XU3lite / XU4This was tested on Odroid XU3 and XU3 Lite, without the XU4, but I'm waiting for reply from the Odroid forum users.
Tested with buildman for samsung.
Available on github:
https://github.com/bobenstein/u-boot/tree/xu3-patchset-testQuoted 8 lines
Przemyslaw Marczak (7):
s5p:cpu_info: use defined CPU name if available
peach-pi: define CPU name for SoC Exynos5800 Exynos5422/5800: set cpu id to0x5422
dm: pmic: add s2mps11 PMIC I/O driver
odroid-xu3: enable s2mps11 PMIC support
Exynos: add internal ADC driver
exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.
Quoted 6 lines
It's nice to have things automatic. Is this easier than having a separate device tree for each board?
Regards
Simon
In my intention was using a single U-Boot binary (u-boot-dtb.bin) with the three almost full compatible boards.
This is also easier for other developers, who don't need care about few configs and few dtb's.
And finally this code can load proper dtb for Linux Kernel for each supported board. So in the next part (Linux boot), things are done clean.
The common board file is quite messy because of this code, so if you don't like it, then I can move it to independent file.
Best regards,
Signature · 4 lines
Przemyslaw Marczak Samsung R&D Institute Poland Samsung Electronics p.marczak at samsung.com