Skip to content

RFC efl bump to 1.14.2

Romain Naour buildroot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 37 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 37 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchVicente Bergas
SeriesT-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [Buildroot] [RFC 00/37] efl bump to 1.14.2

Hello Vicente,

Sorry for the delay.

Le 25/08/2015 00:09, vj a ?crit :

Quoted 43 lines

Hello Romain,

Quoted 40 lines · Romain Naour

Hi Vicente

Le 21/08/2015 19:56, vj a ?crit :

Quoted 18 lines

Hello Romain,

Quoted 10 lines · Romain Naour

Hi Vicente,

Le 21/08/2015 02:30, vj a ?crit :

Quoted 6 lines

Hello Romain,
I've tested you efl update
https://github.com/RomainNaour/buildroot/tree/efl-1.15.0-v1
It did not work, :(
But applying the two patches below works again! The first one was already commented in a previous e-mail.

Quoted 4 lines

Yes, sorry I haven't looked at your issue yet.

libmount seems to be optional and can be disabled with --disable-libmount:
https://github.com/RomainNaour/buildroot/blob/efl-1.15.0-v1/package/efl/efl.mk#L35

Quoted 6 lines

Without that dependency it failed with 1.14.2.
When I saw the dependency was not there in 1.15.0, I just added it again without checking.
Just now I've tried it again without that patch and it's fine, so, you can forget it.
Sorry for the hassle.

It's ok ;-) I haven't heavily tested with a minimal config.
Maybe next time can you post the last ~100 build log lines, it not always easy to reproduce a build issue...

Quoted 8 lines
Quoted 7 lines

But since it's not recommended to disable it, I'll apply your patch :)

Quoted 1 line

The second is related to a regression in efl-1.15.0.

Can you report your issue to the efl mailing list ?

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

I know it would be better to have it fixed upstream, but have no time for that now.
If you would like to, feel free to report it.
To debug it, it helps enabling the WRN and DGB macros in eina_module.c.

Well, I can't really report an issue that I can't reproduce.

Do you mean that the fb backend is working for you?

I mean I don't have this issue because I don't use the fb backend during my test.

Quoted 1 line

Are you crosscompiling with upstream vanilla gcc>=4 for arm?

I'm using a toolchain for ARM build by buildroot with a uClibc-ng.

Quoted 10 lines

It might be a compiler bug too.
I'm using musl gcc 4.9.3 build with buildroot itself. gcc 5 seems broken for arm crosscompilation.
Just for completeness, the compiler I'm using was build with:
buildroot.version=2ebbb7fe355c18a0be3d0fb8e50997142113c46b BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_EABIHF=y
BR2_ARM_FPU_NEON=y BR2_HOST_DIR="/opt/arm-buildroot-linux-musleabihf"

Quoted 8 lines

BR2_OPTIMIZE_3=y
BR2_TOOLCHAIN_BUILDROOT_MUSL=y BR2_BINUTILS_VERSION_2_25_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_GCC_ENABLE_LTO=y
BR2_GCC_ENABLE_GRAPHITE=y BR2_TARGET_OPTIMIZATION="-march=armv7-a -mtune=cortex-a8 -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=hard"

Theses flags are handled directly by your target configuration in "Target options" menu. You don't need to define them in BR2_TARGET_OPTIMIZATION.

Quoted 11 lines
Quoted 8 lines

See, I reported the issue about SDL2 dependency and it's now fixed in the efl 1.15.1. So, I can drop the last patch and avoid to autoreconf the package.

Also, I'm probably not the good person to report an efl issue. Honestly, I don't know what to do with -fvisibility=default.
It would be better if you can send just an email to the enlightenment mailing list to report your issue.

Is "enlightenment-devel at lists.sourceforge.net" the correct mailing list for an efl bug?

Yes it is.

Best regards,
Romain

Quoted 24 lines
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
Quoted 8 lines

The testing I've done has been with the musl libc and with BR2_PACKAGE_EFL_RECOMMENDED_CONFIG unset. Basically the same config as in the previous e-mail.

A minor issue: check the spelling of recommanded.

Ha indeed recommanded is used in Config.in prompt
(my French was turned on sorry ;-) )

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

Thanks for testing!

Thanks for adding musl and maintaining efl!

You're welcome!

Best regards,
Romain

Regards,
Vicente.