Fix operation on Odroid devices
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/4] Fix operation on Odroid devices
Hi,
Quoted 7 lines · Tobias Jakobi
Hello,
currently operation on Exynos4412-based Odroid devices is broken.
The bootloader stops with this message:
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environment
Which board did you use? and Which cad is failed? SD or eMMC? Your [PATCH 4/4] is strange..so i want to get more information.
If you can share more information, i can explain more exactly about your problem.
Best Regards,
Jaehoon Chung
Quoted 20 lines
This series fixes error handling in the s5p sdhci driver and the cause of the issue, which is an inverted card detection check.
Thanks goes to Marek Vasut and Sjoerd Simons who helped me on IRC to get this triaged.
With best wishes,
TobiasTobias Jakobi (4):
exynos: Properly initializehost_capsins5p_sdhci_core_init()
exynos: Fix passing of errors inexynos_mmc_init()
exynos: be more verbose inprocess_nodes()
exynos: fix and cleanupdo_sdhci_init()drivers/mmc/s5p_sdhci.c | 39 +++++++++++++++++++++++---------------- 1 file changed, 23 insertions(+), 16 deletions(-)