Fix operation on Odroid devices
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/4] Fix operation on Odroid devices
Hello,
Quoted 5 lines · Jaehoon Chung
Hi,
Quoted 2 lines · Tobias Jakobi
Hello,
Quoted 7 lines
Quoted 5 lines
currently operation on Exynos4412-based Odroid devices is broken.
The bootloader stops with this message:
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environmentWhich board did you use? and Which cad is failed? SD or eMMC?
This is an Odroid-X2. I'm booting from SD with a Sandisk Extreme. I don't have any eMMC here.
Actually it was some other person who encountered this issue with his Odroid-X2 and booting from SD. After he made me aware of it, I also updated my u-boot (I was then using a version from May 2015, which works perfectly btw) and encountered the very same issue as him.
Quoted 1 line
Your [PATCH 4/4] is strange..so i want to get more information.
For me it restores proper operation of the bootloader to the board.
With best wishes,
Tobias
Quoted 27 lines
If you can share more information, i can explain more exactly about your problem.
Best Regards,
Jaehoon ChungQuoted 20 lines
This series fixes error handling in the s5p sdhci driver and the cause of the issue, which is an inverted card detection check.
Thanks goes to Marek Vasut and Sjoerd Simons who helped me on IRC to get this triaged.
With best wishes,
TobiasTobias Jakobi (4):
exynos: Properly initializehost_capsins5p_sdhci_core_init()
exynos: Fix passing of errors inexynos_mmc_init()
exynos: be more verbose inprocess_nodes()
exynos: fix and cleanupdo_sdhci_init()drivers/mmc/s5p_sdhci.c | 39 +++++++++++++++++++++++---------------- 1 file changed, 23 insertions(+), 16 deletions(-)