Skip to content

Fix operation on Odroid devices

Jaehoon Chung u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] Fix operation on Odroid devices

Dear, Tobias.

Quoted 10 lines · Tobias Jakobi

Hello,

Quoted 7 lines · Jaehoon Chung

Hi,

Quoted 4 lines · Tobias Jakobi

Hello,

currently operation on Exynos4412-based Odroid devices is broken.

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

The bootloader stops with this message:
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environment

Which board did you use? and Which cad is failed? SD or eMMC?

This is an Odroid-X2. I'm booting from SD with a Sandisk Extreme. I don't have any eMMC here.

But if your patch is applied, other exynos4412 and exynos using s5p_sdhci don't work fine for SD-card. This case is the specific X2 board. I think schematic is wrong.
(I have checked the Odrodd_X-base_Rev_06.pdf)

Commonly, SD-detect pin is supplied to always-on power.
But odroid-x/u board used the same supplier with I/O line. It's wrong.

This is H/W mis-designed problem, not code problem.
Well, I will reproduce your problem with X2 board.
And if reproduced your problem, I will find other solution, not this. how about?

Quoted 6 lines

Actually it was some other person who encountered this issue with his Odroid-X2 and booting from SD. After he made me aware of it, I also updated my u-boot (I was then using a version from May 2015, which works perfectly btw) and encountered the very same issue as him.

Need to consider other SoC. You seems to consider only Odroid based-on exyno4412. Did you test other exynos4412 board?

Best Regards,
Jaehoon Chung

Quoted 39 lines
Quoted 3 lines

Your [PATCH 4/4] is strange..so i want to get more information.

For me it restores proper operation of the bootloader to the board.

With best wishes,
Tobias

Quoted 27 lines

If you can share more information, i can explain more exactly about your problem.

Best Regards,
Jaehoon Chung

Quoted 20 lines

This series fixes error handling in the s5p sdhci driver and the cause of the issue, which is an inverted card detection check.

Thanks goes to Marek Vasut and Sjoerd Simons who helped me on IRC to get this triaged.

With best wishes,
Tobias

Tobias Jakobi (4):
exynos: Properly initialize host_caps in s5p_sdhci_core_init()
exynos: Fix passing of errors in exynos_mmc_init()
exynos: be more verbose in process_nodes()
exynos: fix and cleanup do_sdhci_init()

 drivers/mmc/s5p_sdhci.c | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)