Skip to content

memory: pl17x: add support of PL175 and PL176 controllers

Vladimir Zapolskiy linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] memory: pl17x: add support of PL175 and PL176 controllers

Hi Joachim,

Quoted 13 lines · Joachim Eastwood

Hi Vladimir,

Quoted 9 lines · Vladimir Zapolskiy

The change adds support of ARM PrimeCell PL175 MPMC and PL176 MPMC, the static memory controllers on devices are similar to one found on ARM PrimeCell PL172, add support to the existing driver.

Vladimir Zapolskiy (4):
memory: pl172: correct MPMC peripheral ID register bits
memory: pl172: add ARM PrimeCell PL175 MPMC support
memory: pl172: add ARM PrimeCell PL176 MPMC support
doc: dt: arm,pl172: add description of PL175 and PL176 controllers

Quoted 3 lines

Changes look good to me.

What LPC32xx board did you test this on, btw?

I tested PL175 on Timll Devkit3250 board with 4Mb NOR.

Quoted 4 lines

Also if you have added the controller to lpc32xx.dtsi it would be great if you could also submit those changes to the lpc32xx maintainer.

Right, this is in my plans. To avoid any mess in the controller driver, mach-lpc32xx must be converted to common clock framework firstly, that's what I'm doing at the moment, then I'll send the corresponding EMC updates in lpc32xx.dtsi.

By the way I've tested your clocksource driver on LPC32xx and it works fine, but again clean switching to it is not possible until LPC32xx clocks are out of the common clock framework.

--
With best wishes,
Vladimir