Add board detection for Odroid XU3 / XU3Lite / XU4

Hi Siarhei ,

Quoted 48 lines · Siarhei Siamashka

Quoted 29 lines · On Mon, 31 Aug 2015 00:33:16 +0530 Anand Moon <[email protected]> wrote:

At the last moment I got this to work on my odroidxu3 board.

One problem I would like to address out is usb smsc95xx ethernet is not getting started at the boot.

# usb start                   /* command failed at the start */
------------------------------------------------------------------------------------------------------
U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for
ODROID-XU3

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Model: xu3
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
starting USB...

USB0:   USB EHCI 1.00
USB1:   Register 2000140 NbrPorts 2

Quoted 13 lines

Starting the controller
USB XHCI 1.00
USB2: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
-----------------------------------------------------------------------------------------

Hi Anand,

Quoted 7 lines

This looks like it might be the same problem as

     http://lists.denx.de/pipermail/u-boot/2015-October/230827.html

Simon Glass asked if this also happens on XU3, so maybe you could test the same workaround on your board and provide feedback?

--

Odroid u3 also has the same problem
---------------------------------------------------------
U-Boot 2015.10-rc5-00030-gac6a532-dirty (Oct 20 2015 - 01:37:27 +1030)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Model: u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1

*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0

Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
Odroid # usb start
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Odroid #
---------------------------------------------------------

-Anand Moon

Quoted 2 lines

Best regards,
Siarhei Siamashka