arm, imx6, aristainetos2: set gpr register after reset
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH v1 0/2] arm, imx6, aristainetos2: set gpr register after reset
Quoted 26 lines · Heiko Schocher
Hello Stefano,
Am 25.09.2015 um 12:31 schrieb Heiko Schocher:
Quoted 23 lines
setting the gpr 1,8 and 12 registers to a fix value. This is needed because after a WDT reset, this registers are not correct resettet, and prevent linux from booting again.
with this patches no compileerrors found:
$ ./tools/buildman/buildman -b 20150925 mx6 boards.cfg is up to date. Nothing to do. Building 4 commits for 49 boards (8 threads, 1 job per thread) Cloning repo for thread 2 Cloning repo for thread 3 Cloning repo for thread 4 Cloning repo for thread 5 Cloning repo for thread 6 Cloning repo for thread 7 196 0 0 /196 mx6qsabreauto $Heiko Schocher (2):
arm, imx: add some gpr register defines
arm, imx6, aristainetos2: set gpr register after reset
Quoted 7 lines
Quoted 4 lines
arch/arm/include/asm/arch-mx6/imx-regs.h | 35 ++++++++++++++++++++++++++++++++ board/aristainetos/aristainetos-v2.c | 16 +++++++++++++++ 2 files changed, 51 insertions(+)Do you have some comments to this patchset, or can it go into mainline?
No comment on my side - I will pick'em for inclusion.
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================