powerpc/83xx/km: add support for kmvect1 p1a hw version
Heiko Schocher u-boot 1 version New
Get series with b4
Patches in v1 No applies recorded yet
Reviews trailers per patch
All 17 patches have a Reviewed-by or Acked-by.
| Patch | Heiko Schocher |
|---|
| 1/17powerpc/83xx/km: add support for kmvect1 p1a hw version | R-b |
|---|
| 2/17powerpc/83xx: add support for kmtepr2 board | R-b |
|---|
| 3/17powerpc/82xx: make set/get_pin for km82xx more flexible | R-b |
|---|
| 4/17powerpc/82xx/km: add testpin detection for mgcoge3ne | R-b |
|---|
| 5/17km/powerpc: increase space for kernel imange and FDT blob | R-b |
|---|
| 6/17km/powerpc: move open firmware defines to km-powerpc.h | R-b |
|---|
| 7/17km/powerpc: remove unneeded defines | R-b |
|---|
| 8/17km/powerpc82xx: remove unused function | R-b |
|---|
| 9/17powerpc/km8321: define CONFIG_SYS_DDRCDR | R-b |
|---|
| 10/17powerpc/km8321: set the DDRCDR impedance settings back to half strength | R-b |
|---|
| 11/17powerpc/km8309: define CONFIG_SYS_DDRCDR | R-b |
|---|
| 12/17powerpc/km8360: fix the ODT parameters for CS0 | R-b |
|---|
| 13/17board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader | R-b |
|---|
| 14/17km83xx: use CONFIG_ENV_ADDR for the newenv env command | R-b |
|---|
| 15/17km8309: change the default QE_FW address | R-b |
|---|
| 16/17powerpc/83xx: add support for kmtegr1 board | R-b |
|---|
| 17/17km/powerpc: fix ft_board_setup prototype for km82xx & km83xx | R-b |
|---|
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Read the v1 thread →