Skip to content

km/powerpc: various bugfixes and support for 3 new boards

Heiko Schocher u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 15 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 15 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchHeiko Schocher
SeriesR-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 00/15] km/powerpc: various bugfixes and support for 3 new boards

Hello Valentin,

for the hole serie:

Reviewed-by Heiko Schocher <[email protected]>

bye,
Heiko
Am 17.11.2015 um 10:53 schrieb Valentin Longchamp:

Quoted 55 lines

A few bugfixes have been done for the km_kirkwood bards in the last months and this series collects them all to be sumbitted to mainline. Furthermore, support for 2 new Keymile ppc boards are added:
- kmtepr2: based on a 8321, this is another variation of tuxx1
- kmtegr1: based on 8309, similarly to kmvect1 but with a lot of different peripherals

Changes in v2:
- Removed merge conflict files in commit message
- Squashed commit 9/17 and 10/17 together into a single commit
- Rewritten commit message to get rid of internal git commit reference
- Removed support for kmvect1_p1a: not relevant anymore

Bagavathiannan Palanisamy (1):
board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader

Christoph Dietrich (1):
powerpc/83xx: add support for kmtepr2 board

Holger Brunck (6):
powerpc/82xx: make set/get_pin for km82xx more flexible powerpc/82xx/km: add testpin detection for mgcoge3ne km/powerpc: increase space for kernel imange and FDT blob km/powerpc: move open firmware defines to km-powerpc.h km/powerpc: remove unneeded defines km/powerpc82xx: remove unused function

Valentin Longchamp (7):
powerpc/km8321: define CONFIG_SYS_DDRCDR powerpc/km8309: define CONFIG_SYS_DDRCDR powerpc/km8360: fix the ODT parameters for CS0
km83xx: use CONFIG_ENV_ADDR for the newenv env command
km8309: change the default QE_FW address powerpc/83xx: add support for kmtegr1 board km/powerpc: fix ft_board_setup prototype for km82xx & km83xx

  board/keymile/common/common.c      |  5 ++-
  board/keymile/common/common.h      |  2 ++
  board/keymile/km82xx/km82xx.c      | 57 ++++++++++++++-------------------
  board/keymile/km83xx/MAINTAINERS   |  2 ++
  board/keymile/km83xx/km83xx.c      |  2 --
  configs/kmtegr1_defconfig          |  4 +++
  configs/kmtepr2_defconfig          |  4 +++
  include/configs/km/km-powerpc.h    | 10 ++++--
  include/configs/km/km8309-common.h | 12 +++++--
  include/configs/km/km8321-common.h |  6 ++++
  include/configs/km/km83xx-common.h | 11 ++++---
  include/configs/km82xx.h           |  3 --
  include/configs/km8360.h           |  4 +--
  include/configs/suvd3.h            | 65 +++++++++++++++++++++++++++++++++++---
  include/configs/tuxx1.h            | 43 +++++++++++++++++++++----
  15 files changed, 167 insertions(+), 63 deletions(-)

create mode 100644 configs/kmtegr1_defconfig
create mode 100644 configs/kmtepr2_defconfig

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Read the cover letter in its thread