Skip to content

Add Xilinx Zynq boot.bin support

Michal Simek u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 2 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/2] Add Xilinx Zynq boot.bin support
Quoted 11 lines · Nathan Rossi

This patch series adds support for the 'zynqimage' type to mkimage for the Xilinx Zynq platform. As well as adding make targets to generate the boot.bin image file containing SPL by default.

Changes in v2:
* Remove test code

Nathan Rossi (2):
tools: zynqimage: Add Xilinx Zynq boot header generation to mkimage
ARM: zynq: Add target for building bootable SPL image for Zynq

Quoted 9 lines
 Makefile             |   3 +
 common/image.c       |   1 +
 include/image.h      |   3 +-
 scripts/Makefile.spl |  11 +++
 tools/Makefile       |   1 +
 tools/zynqimage.c    | 257 +++++++++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 275 insertions(+), 1 deletion(-)
 create mode 100644 tools/zynqimage.c

Applied both.

Thanks,
Michal

Read the cover letter in its thread