sunxi: PSCI support for H3
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/4] sunxi: PSCI support for H3
Hi Chen-Yu,
Quoted 5 lines · Chen-Yu Tsai
Hi everyone,
This series enables PSCI support for the H3. Like other Allwinner SoCs, the implementation only supports PSCI 0.1, specifically only secondary CPU boot/hotplug.
Thanks, the patches look good to me. I've also tested them on the Orange Pi Plus, works as expected.
Jens
Quoted 38 lines
Patch 1 supports the SMTA (previously called TZPC) TrustZone hardware on H3. This controls non-secure access to some important hardware blocks.
Patch 2 supports the security switch in H3's CCU. This is H3 only. No other SoCs have this feature.
Patch 3 supports H3 using sun6i PSCI implementation. H3 uses the same power sequence as sun6i, including the power clamps. This is shown in Allwinner's SDK, and confirmed / tested by Siarhei.
Patch 4 enables PSCI support for the H3 in
Kconfig.I've only tested booting HYP/SMP on my Orange Pi PC. Hotplugging was not tested, but should work.
Regards
ChenYuChen-Yu Tsai (4):
sunxi: Support Secure Memory Touch Arbiter (SMTA) in sun8i H3
sunxi: Support H3 CCU security switches
sunxi: Support PSCI ops on Allwinner H3
sunxi: Enable booting non-secure and virtualization for H3arch/arm/cpu/armv7/sunxi/Makefile | 1 + arch/arm/cpu/armv7/sunxi/clock.c | 5 +++++ arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 13 +++++++++++++ arch/arm/cpu/armv7/sunxi/psci_sun6i.S | 4 ++-- arch/arm/cpu/armv7/sunxi/tzpc.c | 11 ++++++++++- arch/arm/include/asm/arch-sunxi/clock.h | 1 + arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 7 +++++++ arch/arm/include/asm/arch-sunxi/tzpc.h | 13 ++++++++++++- board/sunxi/Kconfig | 3 +++ 9 files changed, 54 insertions(+), 4 deletions(-)