Skip to content

Convert lpuart serial driver to driver model

Bhuvanchandra DV u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 8 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 8 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/8] Convert lpuart serial driver to driver model

Hi Bin,

Quoted 44 lines · Bin Meng

Hi Bhuvanchandra,

Quoted 40 lines · Bhuvanchandra DV

- Convert lpuart driver to driver model and remove the legacy code.
- Update Toradex Colibri VF50/VF61 serial support with driver model.
- Update Freescale vf610twr serial support with driver model.
- Update Freescale ls1021atwr serial support with driver model.
- Update Phytec pcm052 serial support with driver model.
- Tested the driver on Toradex Colibri VF50/VF61 hardware.
- Compile checked board files for vf610twr, ls1021atwr and pcm052 since I don't have access to such hardware at my end. Reviewers and testers welcome!

Bhuvanchandra DV (8):
dm: lpuart: Add driver model support for the serial driver
colibri_vf: Update enabling lpuart support with driver model
arm: vf610twr: Add driver model support
vf610twr: Update enabling lpuart with driver model
arm: ls102xa: Add driver model support
ls1021x: Update enabling lpuart with driver model
arm: pcm052: Enable driver model support
pcm052: Update enabling lpuart support with driver model

  arch/arm/include/asm/arch-ls102xa/serial.h |  16 ++++
  arch/arm/include/asm/arch-vf610/serial.h   |  16 ++++
  board/freescale/ls1021atwr/ls1021atwr.c    |  15 ++-
  board/freescale/vf610twr/vf610twr.c        |  13 +++
  board/phytec/pcm052/pcm052.c               |  13 +++
  board/toradex/colibri_vf/colibri_vf.c      |  13 +++
  configs/ls1021atwr_nor_lpuart_defconfig    |   1 +
  configs/pcm052_defconfig                   |   1 +
  configs/vf610twr_defconfig                 |   1 +
  configs/vf610twr_nand_defconfig            |   1 +
  drivers/serial/Kconfig                     |   6 ++
  drivers/serial/serial_lpuart.c             | 148 +++++++++++++++--------------
  include/configs/colibri_vf.h               |   6 +-
  include/configs/ls1021atwr.h               |   1 +
  include/configs/pcm052.h                   |   6 +-
  include/configs/vf610twr.h                 |   6 +-
  16 files changed, 180 insertions(+), 83 deletions(-)

create mode 100644 arch/arm/include/asm/arch-ls102xa/serial.h create mode 100644 arch/arm/include/asm/arch-vf610/serial.h

Quoted 5 lines
Quoted 1 line

--

Please see existing patch series @
http://patchwork.ozlabs.org/patch/561855/. You can drop the ls102xa changes and rebase your patch series on top of that. Thanks!

We are not aware of this patch set, sorry! about that. You want me to drop only the ls102xa changes? How about the changes/updates to the lpuart driver? should i update them with your device tree support stuff and rebase the remaining patch set along with your Signed-off-by tag ? Any suggestions ?

Quoted 4 lines

Regards,
Bin

Signature · 2 lines
Best regards,
Bhuvan

Read the cover letter in its thread