Skip to content

Migrate NXP/Freescale Vybrid based boards to support pure DT

Stefano Babic u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v4 Latest0 of 9 patches 0 repliesNew

Patches in v4 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [U-Boot] [PATCHv4 0/9] Migrate NXP/Freescale Vybrid based boards to support pure DT
Quoted 45 lines · Bhuvanchandra DV

Changes since v3:
- Add missing space in device tree.
- Reorder the patchset to avoid broken state.

Changes since v2:
- Split the patch for updating the license string.
- Reorder the patchset to avoid broken state.

Changes since v1:
- Update the license string in device tree's.
- Update all lpuart's uart nodes in device tree.
- Dropped *_dtb_defconfig and updated the default defconfig's with DT support.
- Reordered defconfig's using defconfig via savedefconfig.
- Use one patch to update all Vybrid based board defconfig's.
- Dropped vybrid_gpio driver legacy code. Thanks! Stefan for pointing this.
- Dropped the legacy way of enabling GPIO, UART and SPI on NXP/Freescale Vybrid based board's.

- Compile checked for vf610twr and pcm052 since I don't have access to such hardware at my end. Reviewer's and tester's welcome!

Bhuvanchandra DV (9):
arm: vybrid: Enable lpuart support
arm: vybrid: Update the license string
arm: colibri-vf: Enable serial support
arm: vf610-twr: Add device tree file's
arm: pcm052: Add device tree file's
arm: vybrid: Update defconfig's
arm: vybrid: Drop enabling GPIO, SPI and UART in legacy mode
dm: lpuart: Drop the legacy code
dm: vybrid_gpio: Drop legacy code

 arch/arm/dts/Makefile            |   4 +-
 arch/arm/dts/pcm052.dts          |  22 +++++++++
 arch/arm/dts/vf-colibri.dtsi     |  15 ++++--
 arch/arm/dts/vf.dtsi             |  48 +++++++++++++++++--
 arch/arm/dts/vf500-colibri.dts   |   5 --
 arch/arm/dts/vf610-colibri.dts   |   5 --
 arch/arm/dts/vf610-twr.dts       |  22 +++++++++
 configs/colibri_vf_defconfig     |   8 ++++
 configs/colibri_vf_dtb_defconfig |  14 ------
 configs/pcm052_defconfig         |   7 +++
 configs/vf610twr_defconfig       |   7 +++
 configs/vf610twr_nand_defconfig  |   7 +++
 drivers/gpio/vybrid_gpio.c       |  18 -------
Quoted 9 lines
 drivers/serial/serial_lpuart.c   | 101 +--------------------------------------
 include/configs/colibri_vf.h     |  13 -----
 include/configs/pcm052.h         |   3 --
 include/configs/vf610twr.h       |   3 --
 17 files changed, 131 insertions(+), 171 deletions(-)
 create mode 100644 arch/arm/dts/pcm052.dts
 create mode 100644 arch/arm/dts/vf610-twr.dts
 delete mode 100644 configs/colibri_vf_dtb_defconfig

Whole series applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Read the cover letter in its thread