tegra124: Add support for Avionic Design platform
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest2 patches 0 repliesNew
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | power: as3722: Allow using on any i2c bus with any address | +0 | 0 replies | |
| 2/2 | Add support the Avionic Design Meerkat COM and Kein Baseboard | +0 | 2 replies | |
| 2/2 | Add support the Avionic Design Meerkat COM and Kein Baseboard | +0 | 1 reply |
Reviews trailers per patch
1 of 3 patches has a Reviewed-by or Acked-by.
| Patch | Stephen Warren |
|---|---|
| 1/2 | A-b |
| 2/2 | |
| 2/2 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [U-Boot] [PATCH 0/2] tegra124: Add support for Avionic Design platform
Quoted 5 lines · Julian Scheel
This adds support for the Avionic Design Tegra124 platform. It consists of the Meerkat SOM and a minimal baseboard Kein Baseboard.
The as3722 is placed on a different bus as compared to nvidia Jetson, which makes the as3722 required.
This doesn't appear to be quite true. It looks like the AS3722 is on the same physical bus, it's just that the I2C aliases in DT assign this bus a different number. Typically, all Tegra boards have the PMIC I2C bus as U-Boot I2C bus 0. Is there a good reason not to do that here?