tegra124: Add support for Avionic Design platform
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/2] tegra124: Add support for Avionic Design platform
Quoted 5 lines · Stephen Warren
Quoted 3 lines · Julian Scheel
This adds support for the Avionic Design Tegra124 platform. It consists of the
Meerkat SOM and a minimal baseboard Kein Baseboard.
Quoted 8 lines
Quoted 3 lines
The as3722 is placed on a different bus as compared to nvidia Jetson, which
makes the as3722 required.This doesn't appear to be quite true. It looks like the AS3722 is on the same physical bus, it's just that the I2C aliases in DT assign this bus a different number. Typically, all Tegra boards have the PMIC I2C bus as U-Boot I2C bus 0. Is there a good reason not to do that here?
You are indeed right. I was so sure about it being a different bus that I did not check it at all...
In fact I don't see a real reason not do reorder the i2c to match the other platforms. But let me discuss it with Alban before changing.