usb: Move DWC3 and some gadget options to Kconfig

Hi Michal,

Quoted 43 lines · Lukasz Majewski

Quoted 42 lines

Hi Michal,

Quoted 21 lines · Lukasz Majewski

Quoted 20 lines

Hi Semen,

Quoted 17 lines

Hi All,

This patch series move next options to Kconfigs/defconfigs:
- CONFIG_USB_DWC3*
- CONFIG_USB_GADGET_VBUS_DRAW
- CONFIG_USB_GADGET_DUALSPEED (partially, only for DWC3
platforms for now)
- CONFIG_USB_GADGET_DOWNLOAD
- CONFIG_G_DNL_*

All defconfig files were post-processed via "make savedefconfig" rule to keep correct order of options in defconfigs.

The whole series was tested using buildman tool for all arm boards.

Quoted 6 lines

Quoted 4 lines

I've reviewed your work and I don't have any objections.

Now, I'm trying to setup python test environment (DFU, UMS), so I cannot thoroughly test it.

test/py?

Yes, indeed.

I've some problems with stdin/stdout operation via u-boot-test-console script with using cu on my Odroid XU3.

I do perform soft reset on my board (by sending "reset") and thereafter it seems like no output from u-boot console is examined by pexpect.

I've asked Stephen for sharing his u-boot-test-console file, so he pointed me towards his github:

Quoted 5 lines

Quoted 3 lines

https://github.com/swarren/uboot-test-hooks/blob/master/bin/u-boot-test-console

I hope I will solve this problem today :-).

I am using kermit. I have seen cu too.

With cu I don't see /dev/ttyUSB1 redirected to pexpect.

If I might ask - which USB <-> RS232 converter do you use?