mmc: sdhci: removed unneeded function wrappers
Adrian Hunter linux-arm-kernel linux-mmc 1 version New
Get series with b4
Patches in v1 No applies recorded yet
Reviews trailers per patch
11 of 34 patches have a Reviewed-by or Acked-by.
| Patch | Adrian Hunter |
| 1/23mmc: sdhci: removed unneeded function wrappers | A-b |
| 1/23mmc: sdhci: removed unneeded function wrappers | A-b |
| 2/23mmc: sdhci: move sdhci_get_cd() forward to avoid declaration | |
| 2/23mmc: sdhci: move sdhci_get_cd() forward to avoid declaration | |
| 3/23mmc: core: fix a comment typo | |
| 4/23mmc: sdhci: re-factor sdhci_start_signal_voltage() | |
| 4/23mmc: sdhci: re-factor sdhci_start_signal_voltage() | |
| 4/23mmc: sdhci: re-factor sdhci_start_signal_voltage() | |
| 4/23mmc: sdhci: re-factor sdhci_start_signal_voltage() | |
| 4/23mmc: sdhci: re-factor sdhci_start_signal_voltage() | |
| 4/23mmc: sdhci: re-factor sdhci_start_signal_voltage() | |
| 6/23mmc: sdhci: using common mmc_regulator_set_vqmmc() | |
| 7/23mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch | |
| 7/23mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch | |
| 8/23mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 | |
| 9/23mmc: sdhci: fix incorrect get data interrupt during no data transfer | |
| 9/23mmc: sdhci: fix incorrect get data interrupt during no data transfer | |
| 9/23mmc: sdhci: fix incorrect get data interrupt during no data transfer | |
| 10/23mmc: core: disable auto retune during card detection process | |
| 10/23mmc: core: disable auto retune during card detection process | |
| 10/23mmc: core: disable auto retune during card detection process | |
| 10/23mmc: core: disable auto retune during card detection process | |
| 11/23mmc: sdhci-esdhci-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | A-b |
| 12/23mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback | A-b |
| 13/23mmc: sdhci-esdhc-imx: restore watermark level setting after resume | |
| 14/23mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly | A-b |
| 15/23mmc: sdhci-esdhc-imx: support setting tuning start point | A-b |
| 17/23mmc: sdhci: add standard hw auto retuning support | |
| 18/23mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING | A-b |
| 19/23mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING | A-b |
| 20/23mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue | A-b |
| 21/23mmc: sdhci-esdhc-imx: factor out hw related intialization into function | |
| 22/23mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit function | A-b |
| 23/23mmc: sdhci-esdhc-imx: clear tuning bits during hwinit | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Read the v1 thread →