Skip to content

spi-nor: spi-nor-ids: Fix 4 Byte addressing for n25q256 and n25q512*

Tudor.Ambarus at microchip.com u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 of 3 patches 0 repliesNew

1 of 3 patches is in this archive. The cover letter announces 3.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
3/3spi-nor: spi-nor-ids: Add entries for newer variants of n25q256* and n25q512*drivers/mtd/spi/spi-nor-core.c+0 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH RFT 0/3] spi-nor: spi-nor-ids: Fix 4 Byte addressing for n25q256 and n25q512*

Hi, Simon,

Quoted 19 lines · Simon Goldschmidt

External E-Mail

Hi Vignesh,

Quoted 5 lines · Vignesh Raghavendra

This series removes SPI_NOR_4B_OPCODES flags from legacy variants of n25q256* and n25q512* and adds entries for newer variants of those flashes that support 4 Byte opcodes.

Quoted 7 lines

I don't have the flash devices. So its only compile tested.

Ashish, Simon,

I would greatly appreciate if you could test these patches and make sure 4 Byte opcodes are being used. (Probably by enabling/adding prints to cmd->opcode in spi_mem_exec_op() in drivers/spi/spi-mem.c

Quoted 5 lines

As written in my last mail, I currently cannot get SFDP to work on my board:
I keep getting 0xffdddfdf instead of 0x50444653 (SFDP_SIGNATURE).

Any idea for a reason of that? That device I have here seems to be equipped with an MT25QL256ABA, but that should not be an issue, I think.

Can you please check what's written on the chip itself? Usually manufacturers write the chip name, and then the week and the year in the form week||year. Ex 4214, where week is 42 and the year 2014.

MT25QL256ABA datasheet says that: "Beginning
week 42 (2014), Micron's MT25Q production parts will include SFDP data that aligns with revision 1.6."

So maybe earlier versions don't have sfdp support?

Also, can you try this kind of patch? Let's dump the sfdp header. SPI_FLASH_SFDP_SUPPORT has to be selected.

drivers/mtd/spi/spi-nor-core.c +10 -2
index 1acff745d1a2..7e93be90fc09 100644
@@ -1815,14 +1815,22 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
 {
        const struct sfdp_parameter_header *param_header, *bfpt_header;
        struct sfdp_parameter_header *param_headers = NULL;
-       struct sfdp_header header;
+       struct sfdp_header header = {};
+       u32 *sfdp_table = (u32 *)&header;
        size_t psize;
        int i, err;
 
        /* Get the SFDP header. */
        err = spi_nor_read_sfdp(nor, 0, sizeof(header), &header);
-       if (err < 0)
+       if (err < 0) {
+               dev_err(nor->dev, "spi_nor_read_sfdp err = %d\n", err);
                return err;
+       }
+
+       for (i = 0; i < sizeof(header) / sizeof(u32); i++) {
+               sfdp_table[i] = le32_to_cpu(sfdp_table[i]);
+               dev_err(nor->dev, "sfdp_table[%d] = %08x\n", i, sfdp_table[i]);
+       }
 
 
Quoted 31 lines

Regards,
Simon

Quoted 16 lines

Euginey,

Could you test this series on top of latest u-boot master and confirm that your test cases still work?

Regards
Vignesh

Vignesh Raghavendra (3):
spi-nor: spi-nor-ids: Disable SPI_NOR_4B_OPCODES for n25q512* and

    n25q256*
  spi-nor: spi-nor-ids: Rename mt25qu512a entry
  spi-nor: spi-nor-ids: Add entries for newer variants of n25q256* and
    n25q512*
Quoted 6 lines
 drivers/mtd/spi/spi-nor-ids.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--
2.23.0

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot