add SAM9X60 clock support
Get series with b4
b4 am [email protected]Versions newest first
- v3 Latest0 of 8 patches 0 repliesNew
Patches in v3 No applies recorded yet
None of the 8 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/8] add SAM9X60 clock support
Quoted 41 lines · Claudiu Beznea
Hi,
This series adds SAM9X60 clock support, CCF compatible, so that SAM9X60 based boards (e.g. SAM9X60-EK in this case) to be able to boot with mainline code.
This series is based on u-boot-atmel/next.
Thank you,
Claudiu BezneaChanges in v3:
- move u-boot,dm-pre-reloc properties tosam9x60ek-u-boot.dtsi
- addmain_xtaltosam9x60ek-u-boot.dtsiin patch 8/8Changes in v2:
- remove "Alignment should match open parenthesis" and "Please don't use multiple blank lines" checkpatch.pl warnings
- use u-boot,dm-pre-reloc also insam9x60ek-u-boot.dtsi
- add patch 8/8Claudiu Beznea (8):
board: atmel: sam9x60ek: addSYS_MALLOC_F_LENtoSYS_INIT_SP_ADDR
clk: at91: sam9x60: add support compatible with CCF
ARM: dts: sam9x60ek: add clock frequencies to board file
ARM: dts: sam9x60: use u-boot,dm-pre-reloc
ARM: dts: sam9x60: use slow clock CCF compatible bindings
ARM: dts: sam9x60: use CCF compatibles for PMC
configs: sam9x60ek: update defconfigs for CCF
ARM: dts: sam9x60: use alphabetical orderarch/arm/dts/sam9x60.dtsi | 171 ++------- arch/arm/dts/sam9x60ek-u-boot.dtsi | 70 +--- arch/arm/dts/sam9x60ek.dts | 12 +- configs/sam9x60ek_mmc_defconfig | 4 +- configs/sam9x60ek_nandflash_defconfig | 4 +- configs/sam9x60ek_qspiflash_defconfig | 4 +- drivers/clk/at91/Makefile | 1 + drivers/clk/at91/sam9x60.c | 649 ++++++++++++++++++++++++++++++++++ include/configs/sam9x60ek.h | 3 +- 9 files changed, 716 insertions(+), 202 deletions(-)
Quoted 2 lines
create mode 100644
drivers/clk/at91/sam9x60.c
Applied series to u-boot-atmel/master, thanks !