Skip to content

RISC-V tracing support

Sean Anderson u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchSean Anderson
SeriesT-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] RISC-V tracing support
Quoted 54 lines · Pragnesh Patel

This series add a support of tracing for RISC-V arch.

This series is also available here [1] for testing. Series depends on [2].

[1] https://github.com/pragnesh26992/u-boot/tree/trace
[2] https://patchwork.ozlabs.org/project/uboot/cover/20200729095636.1077054-1-seanga2 at gmail.com/

How to test this patch:
1) Enable tracing in "configs/sifive_fu540_defconfig" CONFIG_TRACE=y CONFIG_TRACE_BUFFER_SIZE=0x01000000 CONFIG_TRACE_CALL_DEPTH_LIMIT=15 CONFIG_CMD_TRACE=y

2) make FTRACE=1 sifive_fu540_defconfig
3) make FTRACE=1

Following are the boot messages on FU540 five cores SMP platform:

U-Boot 2020.10-rc1-02837-g8613dc2e66 (Aug 24 2020 - 20:03:47 +0530)

CPU:   rv64imac
Model: SiFive HiFive Unleashed A00
DRAM:  8 GiB
trace: enabled
MMC:   spi at 10050000:mmc at 0: 0
Loading Environment from SPIFlash... SF: Detected is25wp256 with page size 256 Bytes, erase size 4 KiB, total 32 MiB
OK
In:    serial at 10010000
Out:   serial at 10010000
Err:   serial at 10010000

Board serial number should not be 0 !!
Net:
Warning: ethernet at 10090000 (eth0) using random MAC address - 92:a1:a7:02:5a:14
eth0: ethernet at 10090000
Hit any key to stop autoboot: 0
=> trace stats
177,722 function sites
37,057,350 function calls
1 untracked function calls
1,279,612 traced function calls (36015585 dropped due to overflow)
19 maximum observed call depth
15 call depth limit
37,055,565 calls not traced due to depth
=>

Pragnesh Patel (3):
riscv: Add timer_get_us() for tracing
riscv: Mark riscv_timer_get_count() and sifive_clint_get_count() with
'notrace'
riscv: Mark andes_plmt_get_count() with 'notrace'

Quoted 8 lines
 arch/riscv/lib/Makefile       |  1 +
 arch/riscv/lib/andes_plmt.c   |  2 +-
 arch/riscv/lib/sifive_clint.c |  2 +-
 arch/riscv/lib/timer.c        | 50 +++++++++++++++++++++++++++++++++++
 drivers/timer/riscv_timer.c   |  2 +-
 5 files changed, 54 insertions(+), 3 deletions(-)
 create mode 100644 arch/riscv/lib/timer.c

I tested this on a K210 and had to reduce CONFIG_TRACE_BUFFER_SIZE to 0x100000 (1M) because of its reduced ram. Here is some example output:

U-Boot 2020.10-rc1-00164-gbb14d962f5 (Sep 01 2020 - 16:17:43 -0400)

DRAM:  8 MiB
trace: enabled
In:    serial at 38000000
Out:   serial at 38000000
Err:   serial at 38000000

=> trace stats
76,948 function sites
82,375,426 function calls
1 untracked function calls
36,075 traced function calls (164135507 dropped due to overflow)
17 maximum observed call depth
15 call depth limit
679,059 calls not traced due to depth
=>

--Sean