Skip to content

add support for dll setup on ksz9131

Eugen.Hristev at microchip.com u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] add support for dll setup on ksz9131
Quoted 9 lines · Claudiu Beznea

Hi,

KSZ9131 has an internal DLL used to add proper delay on TX/RX lines to confirm with RGMII timings. The series add support for this. Along with this I included a typo patch.

Thank you,
Claudiu Beznea

Quoted 7 lines

Claudiu Beznea (2):
net: phy: micrel: add support for DLL setup on ksz9131
net: phy: micrel: fix typo

  drivers/net/phy/micrel_ksz90x1.c | 65 ++++++++++++++++++++++++++++++++++++++--
  1 file changed, 63 insertions(+), 2 deletions(-)

Applied to u-boot-atmel/master , thanks !