Skip to content

ARM: dts: Add camera and magnetometer support for TRATS(2) board

Tomasz Figa linux-arm-kernel linux-devicetree linux-samsung-soc 1 version New

Get series with b4
b4 am 7005891.8tx3m8lCx1@flatron

Versions newest first

  1. v3 Latest4 of 13 patches 0 repliesNew

4 of 13 patches are in this archive. The cover letter announces 13.

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
7/13ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board+0 -01 reply
8/13ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board+0 -01 reply
12/13ARM: dts: Add S5K5BA sensor regulator definitions for Trats board+0 -01 reply
12/13ARM: dts: Add S5K5BA sensor regulator definitions for Trats board+0 -00 replies

Reviews trailers per patch

1 of 4 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchTomasz Figa
SeriesR-b
7/13R-b
8/13
12/13
12/13

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 00/13] ARM: dts: Add camera and magnetometer support for TRATS(2) board

Hi Sylwester,

Quoted 49 lines · On Monday 01 of July 2013 17:22:22 Sylwester Nawrocki wrote:

This patch series includes some fixes and extensions to the Exynos dts files to add the camera and magnetometer sensor support for the TRATS and TRATS2 board. It depends on a patch from Tomasz adding initial TRATS2 board dts file [1].

Comparing to the previous version of this patch set I've added a few more patches, for the Exynos4210 based TRATS board and a patch adding MIPI CSIS/DSIM PHY provider nodes and related properties to the PHY consumer nodes.

This series has been tested with the S5K6A3/FIMC-IS and S5K5BAFX (front facing) cameras on top of next-20130627 tag. It can be found also at:
http://git.linuxtv.org/snawrocki/samsung.git/next-20130627-dts-trats-v3

Detailed changes since v2 are listed in each patch.

Changes since v1:
- enabled pull down in cam-port-{a, b}-clk-idle nodes (1/8)
- added node alias for i2c-gpio at 0 I2C controller node (7/8).

[1] http://www.spinics.net/lists/arm-kernel/msg253184.html

Andrzej Hajda (2):
ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes
ARM: dts: Add S5K5BA sensor regulator definitions for Trats board

Jacek Anaszewski (1):
ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board

Sylwester Nawrocki (10):
ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs
ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals
ARM: dts: Add ISP power domain node for Exynos4x12
ARM: dts: Use generic DMA bindings for Exynos4 SPI devices
ARM: dts: Add camera subsystem device nodes to exynos4.dtsi
ARM: dts: Add camera subsystem nodes to exynos4x12.dtsi
ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board
ARM: dts: Add camera device nodes for Exynos4210 SoCs
ARM: dts: Add FIMC nodes for Exynos4210 Trats board
ARM: dts: Add MIPI PHY node to exynos4.dtsi

 arch/arm/boot/dts/exynos4.dtsi            |  102
++++++++++++++++++++++++-- arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 
 23 ++++++
 arch/arm/boot/dts/exynos4210-trats.dts    |  103
++++++++++++++++++++++----- arch/arm/boot/dts/exynos4210.dtsi         |
  30 ++++++++
 arch/arm/boot/dts/exynos4412-trats2.dts   |  110
Quoted 4 lines

+++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
| 61 ++++++++++++++-- arch/arm/boot/dts/exynos4x12.dtsi |
103 +++++++++++++++++++++++++++ 7 files changed, 503 insertions(+), 29 deletions(-)

For all the patches I haven't commented on:

Best regards,
Tomasz