Skip to content

amlogic: vim3: add support for dynamic PCIe enable

Kevin Hilman u-boot u-boot-amlogic 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 of 4 patches 0 repliesNew

1 of 4 patches is in this archive. The cover letter announces 4.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
4/4board: amlogic: vim3: add support for dynamic PCIe enable+0 -00 replies

Reviews trailers per patch

The patch has no Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchKevin Hilman
SeriesR-b T-b
4/4

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/4] amlogic: vim3: add support for dynamic PCIe enable
Quoted 9 lines · Neil Armstrong

The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it.

This serie adds a VIM3 specific board support and adds this dynamic switching right before booting Linux.

Tested on khadas vim3

Kevin