Skip to content

Adds support for Exynos5422 odroid xu3 board

Kevin Hilman u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v11 Latest posting 2/20 of 3 patches 0 repliesNew
  2. v11 posting 1/20 of 3 patches 0 repliesSuperseded

Patches in v11 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v11 yet.

Read the v11 thread

Cover letter [U-Boot] [PATCH v11 0/3] Adds support for Exynos5422 odroid xu3 board
Quoted 14 lines · Hyungwon Hwang

Dear Kevin,

Quoted 9 lines · On Tue, 09 Dec 2014 15:36:00 -0800 Kevin Hilman <[email protected]> wrote:
Quoted 1 line · Hyungwon Hwang

This is v11 of the patchset adding support Odroud XU3 board.

I finally got around to testing this on top of v2015.01-rc3 on my XU3.

As I mentioned earlier, I had to enable the USB and networking options so I could dhcp/tftp but after that it works for me.

Quoted 8 lines
Quoted 3 lines

Feel free to add:

Tested-by Kevin Hilman <[email protected]>

Thanks for yout review. Sjoerd is waiting for his patch merged (title: Exynos: Move down common USB
configuration). So the features related USB and networking will be enabled after this patchset and his patch are merged.

OK, good.

Quoted 22 lines
Quoted 8 lines

[...]

Quoted 4 lines

Note: If you use micro SD card for your test you have to apply the below patch additionally. This patch is needed, because micro sd card is recognized as MMC1 instead of MMC0. Additional work is needed to make it work regardless of device id.

Quoted 8 lines

FYI, with or without your MMC ID patch, I wasn't able to save the environment to the SD card I'm booting from:

ODROID-XU3 # saveenv
Saving Environment to MMC...
dwmci_send_cmd: Timeout.
MMC init failed

Actually I just tested it again. But it works for me.

Saving Environment to MMC...
Writing to MMC(1)... done

Quoted 6 lines

I applied my patchset and MMC ID patch to commit 38cd8c4253013ccdd4052ee021f6066fe9a52551 in
http://git.denx.de/u-boot-samsung.git (branch: master).

I don't know why it does't work for you. Please feel free to need my help for this, if you need.

Curious wh you're using u-boot-samsung.git and not mainline. Can you test this using mainline u-boot v2015.01-rc3?

Kevin

Read the cover letter in its thread