Skip to content

eMMC, SD-card and ethernet support for Vega S95 boards

Kevin Hilman linux-amlogic linux-devicetree 2 versions New

Get series with b4
b4 am CAOi56cUD5xMbEf3+qsWDJUQYhnWUMN4opfG1HQ+UUcrR6pX8eA@mail.gmail.com

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 3 patches 0 repliesNew
  2. v2 posting 1/20 of 3 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] eMMC, SD-card and ethernet support for Vega S95 boards
Quoted 20 lines · Kevin Hilman

Hi Marrtin,

Quoted 16 lines · Martin Blumenstingl

This adds support for the internal eMMC, the SD-card slot and ethernet on all Tronsmart S95 Vega boards.
There are some S95 Vega Meta clones out there where the bootloader does not configure the ethernet registers correctly, leading to non-working ethernet. This will be fixed in a separate series. Boards which are not suffering from broken bootloaders have fully working ethernet.

Changes since v1:
- rebased after latest updates which added the IR decoder to meson-gxbb-vega-s95.dtsi

Changes since the RFC:
- added eMMC support
- renamed fixed 3V3 regulator so it can be re-used for eMMC

Quoted 8 lines
Quoted 5 lines

Martin Blumenstingl (3):
ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95
devices
ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices
ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices

I've applied the ethernet one, but I'm going to wait on the SD/eMMC patches until the driver is finalized for the other one.

Oops, I replied on the wrong thread, but just to be clear, I applied v2 of the ethernet patch, though it doesn't make too much difference in this case.

Kevin

Read the cover letter in its thread