Skip to content

Meson8b: Odroid-C1 improvements

Kevin Hilman linux-amlogic linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] Meson8b: Odroid-C1 improvements
Quoted 9 lines · Martin Blumenstingl

This is a small collection of improvements for the Odroid-C1 board. My main goal is to prepare the CPU voltage regulator as I'm using the Odroid-C1 to test my changes which will enable CPU frequency scaling on Meson8/Meson8b/Meson8m2.

While I was going through the schematics anyways I added more regulators, enabled the SAR ADC and added the /chosen/stdout-path property to make debugging with "earlycon" easier.

Quoted 8 lines

schematics for the board are published by Hardkernel and can be found
here: [0]

NOTE: This series depends on my patch "ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins" [1] from my other series called "Meson8b: add support for the Endless Mini EC-100" as this defines the "pwm_c1_pins" for the CPU voltage regulator (which is controlled via PWM).

Applied to v4.20/dt (on top of the Endless series)

Thanks for pointing out the dependencies,

Kevin