Skip to content

Ethernet PHY interrupt improvements

Kevin Hilman linux-amlogic 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Ethernet PHY interrupt improvements
Quoted 7 lines · Jerome Brunet
Quoted 6 lines · Martin Blumenstingl

this small series consists of two patches:
#1 documents the GPIO to which the PHY's interrupt line is connected
(the name "MAC_INTR" is used in the schematics of Odroid-C2 and
Khadas VIM2)
#2 adds the RTL8211F PHY's interrupt line on Khadas VIM2

Quoted 9 lines
Quoted 6 lines

I was a bit surprised to see that the GXM Q200 board seems to use GPIOH_3 instead of GPIOZ_15 like all other boards. @Jerome: could you please check if GPIOH_3 is correct or if it's a "copy-and-paste" issue (Q200 is the only GXL/GXM based board. GXL/GXM SoCs have fewer GPIOAO pins than GXBB, so the interrupt offset for the same non-GPIOAO pin is different than on GXBB)

Good catch, I confirm that the interrupt in GPIOZ_15 and certainly not GPIOH_3

Series applied to v4.16/dt64 with Jerome's review tags.

Thanks,

Kevin

Read the cover letter in its thread