arm: Add support for SoC S5P4418
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 1 patch 0 repliesNew
Patches in v1 No applies recorded yet
The patch the cover letter announces is not in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH v1 0/1] arm: Add support for SoC S5P4418
Hi Tom,
thanks a lot for your quick reply.
Quoted 10 lines · Tom Rini
Quoted 9 lines · Stefan Bosch
This patch adds support for SAMSUNG's ARM Cortex-A9 based S5P4418 SoC, especially FriendlyARM's NanoPi2 and NanoPC-T2 boards. It is based on
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01. For v2016.01 I
have also made a working SPL (FriendlyARM U-Boot is using a closed source
2nd-bootloader). My plan is to migrate this also to the current U-Boot.
Quoted 6 lines
Quoted 3 lines
Issues:
Please send me a value for "#defineMACH_TYPE_S5P4418" forarch/arm/include/asm/mach-types.h.Do you really need to support non-DT kernels?
I have adopted this from the original Code. What is the alternative? Could you please give me more details (e.g. an example-board).
Quoted 7 lines
Quoted 3 lines
The size of the patch is over 700kB, so I will upload it on
http://www.denx.de/wiki/attach/U-Boot/TooBigPatches if not otherwise instructed.Ah, I would suggest splitting things up into smaller logical chunks (a patch per driver, separate SoC from board, etc) so they're all able to make it to patchwork, thanks!
Ok, I will try to split the patch into chunks <= 100kB without loosing the logic ;-)
Regards,
Stefan