Skip to content

OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx

Rajendra Nayak linux-arm-kernel linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 11 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 11 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
Quoted 6 lines

-----Original Message-----
From: Paul Walmsley [mailto:paul at pwsan.com]
Sent: Thursday, February 17, 2011 4:35 AM
To: Rajendra Nayak
Cc: linux-omap at vger.kernel.org; linux-arm-kernel at lists.infradead.org
Subject: RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for

iclks, OMAP2xxx

Quoted 10 lines · Rajendra Nayak
Quoted 4 lines

Boot-tested on 3430sdp/4430sdp, with CONFIG_PM and with !CONFIG_PM. suspend-offmode tested on 3430sdp and suspend-retmode on 4430sdp (with some out-of-tree patches)

Thanks, will add Tested-by:s.

Quoted 1 line

Dynamic idle testing on 3430sdp showed me some very jerky debug

console

Quoted 5 lines
Quoted 3 lines

the moment a 'echo 1 > /debug/pm_debug/sleep_while_idle' is done. This however seems to be the case even on 2.6.38-rc4 and not related to the current patch series.

Does enabling CONFIG_OMAP2_DSS resolve the problem you're seeing?

Maybe, will try it out. Thanks for the tip.

Quoted 2 lines
Quoted 2 lines

Will debug further, but seems to some 3430sdp specific issue, since

you

Quoted 2 lines
Quoted 2 lines

did not see it on Beagleboard and seems it is not seen on OMAP3 zoom's either. Just out of curiosity, what dynamic-idle state where you able

to

Quoted 3 lines
Quoted 1 line

achieve on Beagle?

Full chip off. I use omap2plus_defconfig, sometimes with

CONFIG_OMAP2_DSS

Quoted 1 line

depending on personal mood and what's being tested. I boot to a shell

and

Quoted 2 lines

run the commands at the end of this message (some of which are probably superfluous).

Ok, thanks.

Quoted 11 lines

- Paul

echo 1 > /debug/pm_debug/sleep_while_idle
echo 1 > /debug/pm_debug/enable_off_mode
echo 5 > /sys/devices/platform/omap/omap_uart.0/sleep_timeout echo 5 > /sys/devices/platform/omap/omap_uart.1/sleep_timeout echo 5 > /sys/devices/platform/omap/omap_uart.2/sleep_timeout echo enabled >

/sys/devices/platform/omap/omap_uart.0/tty/ttyO0/power/wakeup

Quoted 1 line

echo enabled >

/sys/devices/platform/omap/omap_uart.1/tty/ttyO1/power/wakeup

Quoted 1 line

echo enabled >

/sys/devices/platform/omap/omap_uart.2/tty/ttyO2/power/wakeup

Quoted 1 line