Skip to content

add support for omap wake-up interrupts via pinctrl-single, take2

Kevin Hilman linux-arm-kernel linux-devicetree linux-omap lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchKevin Hilman
SeriesR-b T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/6] add support for omap wake-up interrupts via pinctrl-single, take2
Quoted 8 lines · Tony Lindgren

Here's a respin of the pinctrl-single related patches to use chained irq as suggested by Linus W earlier. This series does not try to provide any generic automated solution yet, but works by doing a request_irq() for the wake-up pin, so it should be flexible enough for both manual control and automated solution.

This series removes the last nasty blocker for making omap3 to be device tree only without causing nasty PM regressions.

Indeed, I gave this a spin on several OMAP3 platforms with legacy boot and ran through a series of retention and off-mode tests for idle and suspend with both UART and RTC wakeups. No regressions found. So...

on 3530/beagle, 3730/beagle-xM, 3530/Overo, 3730/Overo STORM

Kevin