OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 11 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 11 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Kevin Hilman |
|---|---|
| Series | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
Quoted 10 lines · Paul Walmsley
Hello,
This patch series adds clock framework-controlled autoidle support for the OMAP2xxx DPLL, APLLs, and OMAP2/3 interface clocks. The old direct register writes in the PM code to enable clock autoidle have been removed.
This series also ensures that all clock autoidle is disabled during boot and only re-enabled if
CONFIG_PMis enabled.
Quoted 7 lines
The series applies on the 'clk_autoidle_a_2.6.39' branch of
git://git.pwsan.com/linux-2.6.Boot-tested on N800, and dynamic idle-tested on OMAP3430 Beagleboard. Compile-tested with
omap1_defconfig,omap2plus_defconfig, a 5912 OSK-only config, an N8x0-only config, an OMAP3-only config, and an OMAP4-only config.
Feel free to merge the various pm*.c changes via your tree.
Kevin