dt-bindings: mvebu-uart: update documentation with extended UART
Gregory CLEMENT linux-arm-kernel linux-devicetree linux-gpio linux-serial 1 version New
Get series with b4
Patches in v1 No applies recorded yet
Reviews trailers per patch
13 of 18 patches have a Reviewed-by or Acked-by.
| Patch | Gregory CLEMENT |
|---|
| 1/16dt-bindings: mvebu-uart: update documentation with extended UART | R-b |
|---|
| 2/16pinctrl: dt-bindings: Fix A37xx uart2 group name | R-b |
|---|
| 3/16serial: mvebu-uart: use driver name when requesting an interrupt | R-b |
|---|
| 4/16serial: mvebu-uart: support probe of multiple ports | |
|---|
| 4/16serial: mvebu-uart: support probe of multiple ports | |
|---|
| 5/16serial: mvebu-uart: use a generic way to access the registers | R-b |
|---|
| 6/16serial: mvebu-uart: add soft reset at probe | R-b |
|---|
| 7/16serial: mvebu-uart: add function to change baudrate | R-b |
|---|
| 8/16serial: mvebu-uart: clear state register before IRQ request | R-b |
|---|
| 9/16serial: mvebu-uart: add TX interrupt trigger for pulse interrupts | R-b |
|---|
| 10/16serial: mvebu-uart: dissociate RX and TX interrupts | |
|---|
| 11/16serial: mvebu-uart: augment the maximum number of ports | R-b |
|---|
| 12/16serial: mvebu-uart: support extended port registers layout | R-b |
|---|
| 13/16arm64: dts: marvell: armada-37xx: add UART clock | A-b |
|---|
| 14/16arm64: dts: marvell: armada-37xx: add second UART port | A-b |
|---|
| 15/16arm64: dts: marvell: armada-3720-db: enable second UART port | A-b |
|---|
| 16/16arm64: dts: marvell: armada-3720-espressobin: fill UART nodes | |
|---|
| 16/16arm64: dts: marvell: armada-3720-espressobin: fill UART nodes | |
|---|
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Read the v1 thread →