Marvell NAND controller rework with ->exec_op()
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 12 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 12 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 00/12] Marvell NAND controller rework with ->exec_op()
Quoted 5 lines · Boris Brezillon
Quoted 4 lines
Robert, it would be great if you could also do more testing on PXA and validate this driver. If needed, a branch ready to be tested is available at [3]. It is based on nand/next and has all the changes brought by the previously mentionned series as well as this one.
Quoted 8 lines
Robert, do you think you'll have some time to test Miquel's branch on your PXA boards? Miquel already tested on one of these boards (CM-X300), but we'd like to have other testers. Also feel free to review the driver if have the time.
Thanks,
Boris
Hi Boris and Miquel,
I have applied the whole serie to linux-next yesterday.
A boot attempt on my zylonite with my old defconfig (with the new Marvell NAND config activated) yields to :
- this message
[ 3.136818] marvell-nfc pxa3xx-nand: could not identify the nand chip [ 3.143874] marvell-nfc: probe of pxa3xx-nand failed with error -22 - then my board hangs
Is there something to be done to improve the trace level so that you can guess what's happening ?
Cheers.
--
Robert