Skip to content

RFC Allow NOMMU for MULTIPLATFORM

Peter Korsgaard linux-arm-kernel 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 RFC Latest posting 2/20 of 25 patches 0 repliesNew
  2. v3 RFC posting 1/20 of 25 patches 0 repliesSuperseded

Patches in v3 posting 2/2 No applies recorded yet

None of the 25 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [RFC v3 PATCH 00/25] Allow NOMMU for MULTIPLATFORM
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Afzal" == Afzal Mohammed <[email protected]> writes:

Hi,

Quoted 10 lines
Quoted 4 lines

You can build a toolchain and initramfs with Buildroot. Have a look at the stm32f429 nommu config:

https://git.buildroot.net/buildroot/tree/configs/stm32f429_disco_defconfig

iiuc, it builds one for Cortex-M. i already had a file system w/ busybox compiled using a Cortex-M toolchain (stolen from Pengutronix's OSELAS.Toolchain), which works on Cortex M4 (Vybrid VF610 M4 core). But it does not work here, i.e. on Cortex A, seems the above mentioned also would have the same effect.

Hmm, I'm not sure why a cortex-M toolchain wouldn't work on cortex-A, I thought the 'M' instruction set was a pure subset of the 'A'.

Quoted 3 lines

And in buildroot, couldn't see Cortex R option in menuconfig, and selecting Cortex-A's excludes flat binary target & presents only with ELF.

We indeed don't have cortex-R support. I'm not aware of any cortex-R Linux support.

When you select a cortex-A variant, then we enable MMU support by default, but you can disable it under toolchain options (Enable MMU) and then the flat binary option is available.

Signature · 1 line
Bye, Peter Korsgaard