Skip to content

arm64: marvell: add cryptographic engine support for 7k/8k

Gregory CLEMENT linux-arm-kernel linux-crypto 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 of 7 patches 0 repliesNew

4 of 7 patches are in this archive. The cover letter announces 7.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
4/7arm64: marvell: dts: add crypto engine description for 7k/8k+0 -00 replies
5/7arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB+0 -00 replies
6/7arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB+0 -00 replies
7/7arm64: defconfig: enable the Safexcel crypto engine as a module+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/7] arm64: marvell: add cryptographic engine support for 7k/8k

Hi Herbert,

Quoted 37 lines · Herbert Xu
Quoted 26 lines · Antoine Tenart

Hi all,

This series adds support for the Inside Secure SafeXcel EIP197 cryptographic engine which can be found on Marvell Armada 7k and 8k boards. A new cryptographic engine driver is added, as well as the relevant device tree definition for the Armada 7040 DB and 8040 DB boards.

This driver needs two firmwares to work correctly. These firmware are usually used for more advanced operations than the ones supported (as of now), but we still need them to pass the data to the internal cryptographic engine.

This series was tested in various ways on both the Armada 7040 DB and the Armada 8040 DB: using the crypto framework self tests, using tcrypt and while performing various transfers with iperf on top of IPsec.

This series is based on top of v4.11-rc1, and is available on a branch (which also contains the PPv2 support for 7k/8k, to ease the process of testing IPsec): https://github.com/atenart/linux v4.11-rc1/7k8k-crypto I can rebase if needed.

Thanks,
Antoine

Quoted 9 lines

Antoine Tenart (7):
Documentation/bindings: Document the SafeXel cryptographic engine
driver
crypto: inside-secure: add SafeXcel EIP197 crypto engine driver
MAINTAINERS: add a maintainer for the Inside Secure crypto driver
arm64: marvell: dts: add crypto engine description for 7k/8k
arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
arm64: defconfig: enable the Safexcel crypto engine as a module

Quoted 1 line

I have no problems with the crypto bits.

Does it means that you agree that I apply the arm-soc related patches (from 4 to 7) to my mvebu trees?

Thanks,

Gregory

Quoted 6 lines

Thanks,

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Read the cover letter in its thread