Macchiatobin updates
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/6] Macchiatobin updates
Hi Russell King,
Quoted 8 lines · Russell King - ARM Linux
This series, based upon the 4.12-rc6 backports branch in the MISL tree:
- adds a maintainer entry for the Macchiatobin board.
- adds GPIO interrupt support to the CP110s
- adds the pinmux entries
- corrects the 5V regulator GPIO entry
- adds support for the I2C mux (used for the SFP slots)
- adds PCIe support
Quoted 7 lines
All entries include the appropriate pinmux and GPIO configuration.
PCIe support has not been tested locally as I have no PCIe cards to test with; this patch includes support for the PCIe reset GPIO signal. If others can test that patch and let me know whether it works, I would be most grateful.
The first patch had been applied on mvebu/arm64-for-4.14.
Patch 2 to 6 had been applied on mvebu/dt64-for-4.14.
For the patch 4, I merged it with the patch that Thomas previously sent
because it was not in mainline yet even if it was on the backport
branch. The resulting patch is attached.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-arm64-dts-marvell-fix-USB3-regulator-definition-on-M.patch
Type: text/x-diff
Size: 2133 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170712/7c7ddc27/attachment.bin>
-------------- next part --------------
Finally I tested the last patch with an Ethernet PCIe card it worked well, but the reset part was not tested as I don't know how it should be tested.
As soon as the v4.13-rc1 will be released then the branches will be rebased on it and renamed mvebu/arm64 and mvebu/dt64.
Thanks,
Gregory
Quoted 10 lines
MAINTAINERS | 6 ++ arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 89 +++++++++++++++++++++- .../boot/dts/marvell/armada-cp110-master.dtsi | 11 ++- .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++- 4 files changed, 112 insertions(+), 5 deletions(-)Signature · 3 lines
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com