Skip to content

OMAP: DMA: hwmod and DMA as platform device

Kevin Hilman linux-arm-kernel linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 of 9 patches 0 repliesNew

2 of 9 patches are in this archive. The cover letter announces 9.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
7/9OMAP1: DMA: Implement in platform device modelarch/arm/mach-omap1/dma.c+11 -110 replies
7/9OMAP1: DMA: Implement in platform device model+0 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/9] OMAP: DMA: hwmod and DMA as platform device
Quoted 9 lines · Tony Lindgren
Quoted 8 lines · G, Manjunath Kondaiah

*************************************************************************

Test Report:
************
Build:
omap2plus_defconfig : Success
omap_osk_5912_defconfig: Success

Quoted 8 lines
Quoted 3 lines

Boot:
OMAP3530Beagle : Success
OMAP4430Blaze(ES2.1) : Success

Can you please make sure that memory to memory DMA test runs OK on OSK5912?x

AFAIK, Kevin tried it a few days ago and it hung.

Yes, it hung, but I didn't have time to debug the root cause until today.

The reason is that the OMAP1 DMA IRQ numbers used in mach-omap1/dma.c have no basis in reality. So doing a memory-to-memory transfer using *all* channels results in spurious interrupts, then hangs.

Will post details in reply to the OMAP1 patch (7/9).

Kevin