phy: marvell: cp110: fix Armada 8k rev B0 boot hang
Get series with b4
b4 am 87o8kxtg55.fsf@tarshishVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] phy: marvell: cp110: fix Armada 8k rev B0 boot hang
Hi Stefan,
Quoted 9 lines · Stefan Roese
Quoted 5 lines · Baruch Siach
Boot of Armada 8040 rev B0 hangs when U-Boot attempts to initialize the PCIe serdes. Adapt patches from downstream Marvell tree that move serdes initialization to ATF.
This series requires upstream ATF version 2.1 or newer.
Is there a way to detect if an older ATF is installed and print an error message (warning) in this case?
I see no way to detect ATF version using smc_call().
Downstream Marvell ATF have the required code[1] in the 18.12.2 release[2], which is based on ATF 1.5. This is the last ATF version from Marvell that was released on github.
[2] https://github.com/MarvellEmbeddedProcessors/atf-marvell/commits/atf-v1.5-armada-18.12
baruch
Signature · 3 lines
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -