arm: mvebu: fixes for previous DS213j/DS414 series
Get series with b4
b4 am [email protected]Versions newest first
- v0 Latest0 of 2 patches 0 repliesNew
Patches in v0 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v0 yet.
Cover letter [PATCHv0 0/2] arm: mvebu: fixes for previous DS213j/DS414 series
Hi Jason,
Quoted 13 lines · Arnaud Ebalard
This series contains two patches. I spent some time reading the patches of my previous series you had to manually apply. I only noticed the error Ben reported on v6 (i.e. some pinctrl entries still using
pmx_instead of_pins) which patch 1 corrects.Regarding the second patch, having forgotten to enable
MACH_ARMADA_XPin my kernel config, I missed a renaming of ge0/1 pinctrl entries inarmada-xp.dtsi, which resulted in a non-compiling .dts file for DS414. To fix my mistake, you did a s/ge[01]_rgmii_pins/pmx_ge[01]_rgmii/, reintroducing some of thepmx_naming that should have been removed in the process. So, the second patch in that series finishes the work to normalize pinctrl entries in Armada SoCs DT files.
Quoted 6 lines
The patches do apply on your mvebu/dt branch. They do pass a whole compilation (including 'make dtbs') and I can boot a resulting kernel on my DS213j. I do not have a DS414 at hand but will test on this device early next week.
I hope eveyhting is now back in order w/ those. Feedback appreciated.
Just tested the series on a DS414, booting a debian on a 4-disk RAID5 array. I do get an IP via DHCP from both ethernet ports. Plugging an USB device on rear ports (USB 3.0) or front port (USB 2.0) also works.
Cheers,
a+