Add support for Pinebook

Vagrant Cascadian u-boot 2 versions Oct 18, 2018 – Oct 30, 2018 New

Get series with b4

b4 am [email protected]

Versions newest first · linked by author and title

v4 Latest Oct 30, 20180 of 5 patches 0 repliesNew
v3 Oct 18, 20181 of 5 patches 0 repliesSuperseded

Patches in v4 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

Patch	Vagrant Cascadian	Dennis Gilmore
Series	T-b	T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [U-Boot] [PATCH v4 0/5] Add support for Pinebook

Tested series applied to u-boot 2018.11-rc3 on pinebook, both with reboot and cold boot.

Thanks for all the work on it!

Tested-by Vagrant Cascadian <[email protected]>

Quoted 42 lines · Vasily Khoruzhick

This series adds support for the Pinebook, an allwinner A64 laptop produced by Pine64. It also syncs sun50i-a64.dtsi with linux, adds support for mmc delay calibration, R_I2C controller, and addresses the issue with activating video bridge when any of GPIOs is missing.
v2: - sync sun50i-a64.dtsi with linux instead of adding missing nodes
- take sun50i-a64-pinebook.dts from linux
- don't introduce new Kconfig for A64 MMC calibration
- improve code in video bridge uclass to check for presensce of GPIO instead of ingoring EINVAL errors
v3: - enable calibration for H6 as well
- init ret variable in video_bridge_set_active()
- fix order of dts files Makefile
- split anx6345 binding into sun50i-a64-pinebook-u-boot.dts
- drop speaker_amp node from pinebook dts
- drop unnecessary options from defconfig
v4: - sync device tree files with linux-next
Vasily Khoruzhick (5):
mmc: sunxi: add support for automatic delay calibration
dm: video: bridge: don't fail to activate bridge if reset or sleep
GPIO is missing
sunxi: DT: A64: update device tree files for Allwinner A64 SoC
sun50i: A64: add support for R_I2C controller
sunxi: DT: add support for Pinebook
 arch/arm/dts/Makefile                        |   1 +
 arch/arm/dts/sun50i-a64-amarula-relic.dts    | 168 +++++++++-
 arch/arm/dts/sun50i-a64-bananapi-m64.dts     |  34 +-
 arch/arm/dts/sun50i-a64-nanopi-a64.dts       |  89 +++++-
 arch/arm/dts/sun50i-a64-olinuxino.dts        | 103 +++++-
 arch/arm/dts/sun50i-a64-orangepi-win.dts     | 179 ++++++++++-
 arch/arm/dts/sun50i-a64-pine64.dts           |  32 +-
 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi |  15 +
 arch/arm/dts/sun50i-a64-pinebook.dts         | 294 +++++++++++++++++
 arch/arm/dts/sun50i-a64-sopine-baseboard.dts |  32 +-
 arch/arm/dts/sun50i-a64-sopine.dtsi          |  15 +
 arch/arm/dts/sun50i-a64.dtsi                 | 313 +++++++++++++++++--
 arch/arm/include/asm/arch-sunxi/gpio.h       |   1 +
 arch/arm/include/asm/arch-sunxi/mmc.h        |   6 +-
 arch/arm/mach-sunxi/Kconfig                  |   1 +

Quoted 11 lines

 board/sunxi/board.c                          |   6 +
 configs/pinebook_defconfig                   |  22 ++
 drivers/mmc/sunxi_mmc.c                      |  21 +-
 drivers/video/bridge/video-bridge-uclass.c   |  16 +-
 19 files changed, 1296 insertions(+), 52 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
 create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
 create mode 100644 configs/pinebook_defconfig

Signature · 1 line

2.19.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181030/4b27f0c9/attachment.sig>

Read the cover letter in its thread