Skip to content

Add support for Kendryte K210 RISC-V boards

Peter Korsgaard buildroot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest1 of 6 patches 0 repliesNew

1 of 6 patches is in this archive. The cover letter announces 6.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
3/6package/elf2flt: add RISC-V support+0 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [Buildroot] [PATCH v2 0/6] Add support for Kendryte K210 RISC-V boards
Quoted 13 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Damien" == Damien Le Moal <[email protected]> writes:

This patch series adds support for building bootable images for RISC-V boards based on the Kendryte K210 SoC which is supported by the Linux kernel since version 5.8.0. This SoC has no MMU supported by Linux and requires uClibc flatbin binaries as gcc does not yet support FDPIC executables for RISC-V.

The first four patches adjust buildroot configuration to allow building uClibc static no-MMU libraries for RISC-V. The last and fifth patch adds buildroot defconfig for the Kendryte K210 as well as uClibc and busybox configuration.

Quoted 5 lines

Building is as simple as:
make kendryte_k210_defconfig
make

Which generate the output/image/loader.bin bootable image.

Nice! With 2020.08 out the door and kernel 5.8 added, this was next on my todo list, so great timing ;)

Signature · 1 line
Bye, Peter Korsgaard