Skip to content

mmc: sdhci-esdhc-imx: fix acmd23 unwork and ddr not supported on sabresd issues

Chris Ball linux-arm-kernel linux-mmc 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 6 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/6] mmc: sdhci-esdhc-imx: fix acmd23 unwork and ddr not supported on sabresd issues

Hi Dong,

Quoted 9 lines · Dong Aisheng

Patch 1~3 fix acmd23 unwork issue.
Currently the eMMC chip integrated on i.MX6Q SabreSD boards does not work. (It's easily reproduced once you enable usdhc4 on sabresd, see patch 3) It's caused by acmd setting bits are never cleared once it's been set which cause the next normal commands to work abnormally.

Patch 4~6 fix DDR not supported on SabreSD board.
The SabreSD board does not have 1.8v signal voltage switch support for uSDHC, thus it can not support UHS_DDR50 mode which can only run at 1.8v signal voltage.

Thanks, pushed patches 1-6 to mmc-next for 3.14.

- Chris.

Signature · 1 line
Chris Ball   <[email protected]>   <http://printf.net/>