mmc: sdhci-esdhc-imx: add std tuning for mx6sl and DDR mode support
Get series with b4
b4 am [email protected]Versions newest first
- v3 Latest0 of 8 patches 0 repliesNew
Patches in v3 No applies recorded yet
None of the 8 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/8] mmc: sdhci-esdhc-imx: add std tuning for mx6sl and DDR mode support
Hi Dong,
Quoted 7 lines · Dong Aisheng
The i.MX6SL supports standard tuning as defined in standard host control spec v3.0. So this patch series add std tuning support for i.MX6SL.
(NOTE i.MX6SL can also work on the old manual tuning mode as i.MX6Q/DL) In the meanwhile, it also adds DDR mode support.
Then SD3.0 cards which can only support DDR50 can work properly now with this patch series.
Quoted 8 lines
Patch 1~3 add stardard tuning support for i.MX6SL. Patch 4~5 add DDR mode and delay line support Patch 6~8 some other related minor fixes.
Tested on i.MX6SL EVK board.
The patch series is generated based on the latest mmc-next branch with Shawn's (1)[PATCH v2 0/4] mmc: sdhci-esdhc-imx: eliminate enum
imx_esdhc_typein Chris' tree.
Thanks, all eight patches pushed to mmc-next for 3.13 with Shawn's ACK.
- Chris.
Signature · 1 line
Chris Ball <[email protected]> <http://printf.net/>