Skip to content

mmc: sdhci-esdhc-imx: add SD3.0 support

Chris Ball linux-arm-kernel linux-mmc 2 versions New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest posting 2/20 of 9 patches 0 repliesNew
  2. v2 posting 1/20 of 9 patches 0 repliesSuperseded

Patches in v2 posting 2/2 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support

Hi,

Quoted 20 lines · Shawn Guo
Quoted 19 lines · Chris Ball

Hi Shawn, Sascha,

Quoted 16 lines · Dong Aisheng

This patch series add SD3.0 support for i.MX6Q/DL.
Since freescale i.MX6Q/DL uSDHC clock tuning progress is a little different from
the standard tuning process defined in host controller spec v3.0. So we add a hook to allow execute platform specific tuning instead of standard host controller tuning.

The main difference are:
1) not only generate Buffer Read Ready interrupt when tuning is performing. It generates all other DATA interrupts like the normal data command.
2) SDHCI_CTRL_EXEC_TUNING is not automatically cleared by HW, instead it's controlled by SW.
3) SDHCI_CTRL_TUNED_CLK is not automatically set by HW,
it's controlled by SW.
4) the clock delay for every tuning is set by SW.

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

Tested on i.MX6Q Sabreauto board.

Please could someone ACK this series? Thanks,

One thing need to mention is that the series only adds support for UHS SDR cards, and DDR cards haven't been working yet.

Thanks, patches 1-8 pushed to mmc-next for 3.13 with Shawn's ACK.

- Chris.

Signature · 1 line
Chris Ball   <[email protected]>   <http://printf.net/>