Skip to content

ARM: dts: armada388: rework clearfog's .dtsi references

Gregory CLEMENT linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 of 5 patches 0 repliesNew

3 of 5 patches are in this archive. The cover letter announces 5.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: dts: armada388-clearfog: add phy reset gpio-hog+0 -01 reply
1/5ARM: dts: armada388-clearfog: add phy reset gpio-hog+0 -01 reply
1/5ARM: dts: armada388-clearfog: add phy reset gpio-hog+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] ARM: dts: armada388: rework clearfog's .dtsi references

Hi Russell,

Quoted 6 lines · Russell King

This patch series, based upon the previous series adding Clearfog Base support, reworks the clearfog .dtsi file to reference nodes by label rather than by path.

Not everything is moved - just those which had labels at the time the patches were created.

All the series is applied on mvebu/dt, however I would like to have a commit log for the first patch before pushing it to arm-soc.

Thanks,

Gregory

Quoted 5 lines
 arch/arm/boot/dts/armada-388-clearfog-base.dts     |  15 +
 arch/arm/boot/dts/armada-388-clearfog.dtsi         | 353 ++++++++++-----------
 .../arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 113 ++++---
 3 files changed, 245 insertions(+), 236 deletions(-)
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Read the cover letter in its thread