rtc: rtc-isl12057: fixes and alarm support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCHv1 0/6] rtc: rtc-isl12057: fixes and alarm support
Hi,
Quoted 9 lines · Uwe Kleine-K?nig
Quoted 8 lines · Arnaud Ebalard
I wonder if you could take a look at this series I sent providing fixes (patches #1-5) and alarm support (patch #6) for ISL12057 RTC Chip. As all people do for RTC patches - due to lack of feedback from maintainer
- I am looking for someone to review the patches (Mark, patch 6 has a sticker w/ regmap-inside ;-)) and then push those upstream if they are ok (Jason, you handled that part for70e123373c05: "rtc: Add support for Intersil ISL12057 I2C RTC chip" in 2013 for the same reason).
Quoted 7 lines
Quoted 6 lines
Note that I addressed previous comments and feedback received from Uwe and also spent time to do some soldering in order to support and test the last patch for both my use case (Alarm IRQ signal not routed to the SoC on ReadyNAS RN102, RN104 and RN2120) and the common case.
Do not hesitate to ask if you want me to resend!
akpm already applied the series, doesn't he?
I am not really familiar w/ -mm tree workflow. It was not clear to me whether it was sitting in -mm tree waiting for reviewed-by and acked-by.
Quoted 6 lines
I'm about to test the patches, just fighting with my NAS to boot my custom kernel.
Apart from that patches 1 - 5 can have my Ack. Didn't look deep enough into patch 6 yet. @akpm: No need to hurry adding them, I hope to be able to also provide Tested-by:-tags later today.
I'll be happy to handle comments and possible requests for additional changes if needed.
Cheers,
a+
ps: anyway, thanks Andrew!