Skip to content

ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL support

Laurent Pinchart linux-arm-kernel linux-sh 1 version New

Get series with b4
b4 am 8827692.Lf3xZYpHdb@avalon

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
2/4ARM: shmobile: Genmai LED1 and LED2 support+0 -00 replies
3/4ARM: shmobile: Genmai I2C-over-GPIO support+0 -01 reply
3/4ARM: shmobile: Genmai I2C-over-GPIO support+0 -00 replies
3/4ARM: shmobile: Genmai I2C-over-GPIO support+0 -01 reply
4/4ARM: shmobile: Genmai SCIF2 PINCTRL configuration+0 -00 replies

Reviews trailers per patch

2 of 5 patches have a Reviewed-by or Acked-by.

PatchLaurent Pinchart
2/4A-b
3/4
3/4
3/4
4/4A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 00/04] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL support

Hi Magnus,

Thank you for the patches.

Looking at how the PFC and GPIO registers are interleaved I'll really need the datasheet to properly review this and the previous PFC and GPIO patches.

Quoted 29 lines · On Wednesday 27 November 2013 17:27:36 Magnus Damm wrote:

ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL support

[PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes [PATCH 02/04] ARM: shmobile: Genmai LED1 and LED2 support [PATCH 03/04] ARM: shmobile: Genmai I2C-over-GPIO support [PATCH 04/04] ARM: shmobile: Genmai SCIF2 PINCTRL configuration

Add various device nodes to the r7s72100 SoC and the Genmai board, nothing special just basic support for LEDs and I2C-over-GPIO.

Patch 4/4 depends on the r7s72100 PINCTRL pin grouping, but 1-3 depends on the GPIO driver.

---

Written against renesas.git tag renesas-devel-v3.13-rc1-20131125 and [PATCH] pinctrl: sh-pfc: Initial r7s72100 support
[PATCH v3] gpio: Renesas RZ GPIO driver V3

The following patches are needed for 4/4:
[PATCH 00/03] pinctrl: sh-pfc: r7s72100 SCIF2 support [PATCH 01/03] pinctrl: sh-pfc: r7s72100 SCIF2 port3 support [PATCH 02/03] pinctrl: sh-pfc: r7s72100 SCIF2 macro conversion [PATCH 03/03] pinctrl: sh-pfc: r7s72100 SCIF2 port4, 6 and 8 support

 arch/arm/boot/dts/r7s72100-genmai-reference.dts |   41 +++++-
 arch/arm/boot/dts/r7s72100.dtsi                 |  154

+++++++++++++++++++++++ 2 files changed, 194 insertions(+), 1 deletion(-)

Signature · 3 lines
Regards,

Laurent Pinchart