Skip to content

net: phy: check for aneg disabled and half duplex in phy_ethtool_set_eee

Heiner Kallweit netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 4 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2net: phy: check for aneg disabled and half duplex in phy_ethtool_set_eeedrivers/net/phy/phy.c+3 -03 replies
2/2r8169: rely on sanity checks in phy_ethtool_set_eeedrivers/net/ethernet/realtek/r8169_main.c+0 -61 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH net-next 0/2] net: phy: check for aneg disabled and half duplex in phy_ethtool_set_eee

EEE requires aneg and full duplex, therefore return EPROTONOSUPPORT if aneg is disabled or aneg resulted in a half duplex mode.

Heiner Kallweit (2):
net: phy: check for aneg disabled and half duplex in
phy_ethtool_set_eee
r8169: rely on sanity checks in phy_ethtool_set_eee

 drivers/net/ethernet/realtek/r8169_main.c | 6 ------
 drivers/net/phy/phy.c                     | 3 +++
 2 files changed, 3 insertions(+), 6 deletions(-)
Signature · 1 line
2.26.2